|
- Course Descriptions
- (Listed in IE, IME,
and MFE Prefix Order)
IE 225/225L Fundamentals
of Human Factors Engineering/Laboratory (3/1)
Study of human physiological,
biomechanical and psychological characteristics and how they
influence engineering and design of equipment, machines, products,
facilities, tools and environments. 3 lecture-problems, l three-hour
laboratory.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE
311 Industrial Engineering Mathematical Analysis (3)
Application of linear equations,
matrices and determinants to the solution of industrial engineering
problems. Mathematical analysis of the effects of changes in
system's operating parameters on product/service performance,
quality and cost. 3 lecture-problems. Prerequisite: MAT 214.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE
327/327L Elements of Industrial Engineering Systems Laboratory
(3/1)
Concepts and principles of system
engineering theory. Introduction to the theory and methodology
of engineering systems. Development of analytic techniques to
establish needs, objectives, priorities and utilities and the
evaluation of system effectiveness. 3 lecture-problems, 1 three-hour
laboratory. Prerequisites: IE 311.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE 392 Principles
of Productivity Engineering (3)
- Productivity definitions, concepts
and trends, use of various industrial engineering techniques
in productivity improvement, relationship between productivity
and profit, phases of a productivity improvement project, case
studies. Plant visits and guest speakers. 3 lecture-problems.
Prerequisite: Upper division standing.
- [Top][MFE Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
NOTE: IE 401
has been replaced in the catalog by EGR 403 Capital Allocation Theory. Students with IE 401 in their curriculum should
take EGR 403 instead.
IE 401 Engineering
Economic Decision Analysis (4)
Engineering economic analysis
of projects and capital expenditures. Concepts of time value
of money, cash flow, capital rationing and selection of minimum
rate of return. Structural analysis of alternatives, replacement
analysis, analysis of public projects, sensitivity analysis,
probability concepts applied to analysis, effects of inflation
and tax consequences. Open to engineering majors, others as space
permits. Prerequisite: Junior standing, course in probability
and statistics recommended. 4 lecture problems-solving sessions.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE 403 Engineering
Cost Estimating (3)
Concepts and techniques of forecasting
and estimating costs of engineering, manufacturing and service
operations, products, equipment, projects and systems. Preliminary
and detailed procedures. Qualitative, quantitative and computer
methods. 3 lecture-problems. Prerequisite: Junior standing in
engineering.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE
416 Operations Research I (4)
Applications of linear programming
and non-linear programming, queuing theory and other analysis
techniques to problems encountered in industry and business.
4 lecture-problems. Prerequisites: IE
311.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE
417 Operations Research II (4)
Development and application
of planning and inventory models, networks and graph techniques,
Markov analysis, waiting lines, simulation and sequencing and
scheduling algorithms to problems encountered in industry and
business. 4 lecture-problems. Prerequisite: IME
312.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IE 419 Reliability
Concepts and Techniques (3)
Reliability concepts and techniques
as used in various types of industrial organizations. Analysis
of the influence of reliability on such factors as complexity,
state of the art and environment. Component reliability related
to systems requirements. 3 lecture-problems. Prerequisite: IME 312.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE 426 Applied Decision
Theory (3)
Introduction to decision theory
and its applications. Modern utility theory and its application
to decision making under risk and uncertainty. Applications of
Bayesian decision theory. Emphasis on applications covering a
wide range of both profit and nonprofit oriented institutions.
3 lecture-problems. Prerequisite: IME
312 or equivalent.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IE
429/429L Industrial Systems Design (4)
Systems analysis, design and
measurement. Data gathering and analytical tools used in formulating
and optimizing work systems. Theory of systems concepts based
on logical synthesis and empirical analysis. Case studies and
industrial simulations. 3 lecture-problems, 1 three-hour laboratory.
Prerequisites: IME 312.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE
436/436L Operations Planning and Control/Laboratory (2/l)
Analysis and design of systems
for planning, scheduling and controlling production, inventory
and service operations/activities. Use of mathematical and computer
models. Projects and open ended problems. 2 lecture-problems,
l three-hour laboratory.
Prerequisites: IE
327, IE 416, IME 326.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IE 437 Industrial
Engineering Systems (3)
Concepts of systems engineering
methodology. Methods of technological forecasting and future
study. The design and analysis of complex systems under conditions
of risk, uncertainty and changing environment. 3 lecture-problems.
Prerequisite: IE 327.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME
112 Industrial and Manufacturing Engineering Fundamentals (3)
Introduction to industrial and
manufacturing engineering concepts, functions and techniques.
Solution of elementary industrial and manufacturing engineering
problems. 3 lecture-problems.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME
113/113L Industrial and Manufacturing Engineering Computations/Laboratory
(1/1)
Fundamentals of digital computer
methods, logic diagramming, programming in a high-level language.
Computer solutions of elementary industrial and manufacturing
engineering problems. l lecture-problem, l three-hour laboratory.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME 134/134L Molding
and Casting/Laboratory (1/1)
Shaping of metals while in the
liquid state, common molding and casting techniques for both
ferrous and non-ferrous materials and alloys. 1 lecture-problem,
1 three-hour laboratory.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME
224/224L Work Analysis and Design (3/1)
Theory and application of work
analysis as related to process design, facilities, workplace
layout, tools and equipment and services. Analytical techniques
of measurement of work content including stopwatch time study,
standard data, predetermined time systems and work sampling.
3 lecture-problems, 1 three-hour laboratory.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME 228/228L Electronic
Process Design/Laboratory (1/1)
Design of manufacturing processes
with particular emphasis on processes used in the electronics
industry. Evaluation of alternative methods of processing depending
upon delivery, volume and quality specifications. Types of processes
included are finishing, plating, printed circuit board production,
component preparation and installation, chassis construction,
electroforming and packaging. 1 lecture-problem, 1 three-hour
laboratory, Prerequisite: Basic electronic and drafting course
or consent of instructor.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME
239 Industrial Costs and Controls (3)
Engineering approach to cost
recording, budgetary procedures and controls. Estimating production
costs. Engineering problems. Current techniques in automating
the cost recording and cost control functions. 3 lecture-problems.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME 280 Processes
and Measurement (4)
Commonly used manufacturing
and service processes and systems, units of measurement, and
measurement techniques. Introduction to process capability and
the continuous improvement process. Perquisite: STA 120 or STA
309 or IME 301
or equivalent.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME 299/299A/299L
Special Topics for Lower Division Students (1-4)
Group study of a selected topic,
the title to be specified in advance. Total credit limited to
8 units, with a maximum of 4 units per quarter. Prerequisite:
Permission of instructor. Instruction is by lecture, laboratory
or a combination of both.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME
301 Variability and the Statistical Approach to Engineering Design
(3) See
Syllabus
- The study of variability in
real-world engineering problems. Graphical methods of data analysis.
Importance of the statistical approval to engineering design.
The role of statistical tools in design and development. 3 lecture/problems.
Prerequisite: MAT 116 or integral calculus.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME
312 Engineering Probability and Statistics (3)
Engineering applications of
the concepts of probability, statistical distributions, statistical
analysis, regression and correlation analysis, analysis of variance
and covariance, design of experiments and probabilistic and statistical
models. 3 lecture-problems. Prerequisite: IME
301 or STA 309.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME
326 Production Planning and Control (3)
Principles of production planning
and control systems. Methods of forecasting, planning, scheduling
and controlling production operations and inventory activities.
Quantitative models and computer systems. 3 lecture-problems.
Prerequisites: IME 112,
IME 312.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME
331/331L Facilities Planning, Layout and Design (3/1)
Planning and designing facilities,
layouts and material handling systems. Systems engineering approach;
quantitative analysis methods; computerized techniques. Projects.
3 lecture-problems, 1 three-hour laboratory. Prerequisites: MFE 201 or equivalent
or consent of instructor, IME 326. MFE 126/126L recommended.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME 400 Special Problems
for Upper Division Students (1-2)
Individual or group investigation,
research, studies or surveys of selected problems. Total credit
limited to 4 units, with a maximum of 2 units per quarter.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME
415 Quality Control by Statistical Methods (4) See
Sample Syllabus
Systems of inspection, analysis
and action taken to control the quality of manufacturing processes.
Process control techniques, acceptance sampling methods, statistical
analysis and other techniques used by management to control costs
and improve quality. 4 lecture-problems. Prerequisite: IME 312.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME 435/435L Design
of Experiments (3/1)
Introduction to design and analysis
of experiments. Applications in product and process design and
development; process correction and quality improvement. Taguchi's
loss-function approach to quality; signal-to-noise ratio analysis.
3 lecture/problems, l three-hour laboratory. Prerequisite: IME 312.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME 455/455L Principles
of Robotics/Laboratory (2/1)
Components of robots, industrial
robots, robot programming, economics of robotics, interfacing
robots with process machines, parts feeders, conveyors and inspection
devices, robot controllers, microprocessors, applications, case
studies, plant visits. 2 lecture-problems, 1 three-hour laboratory.
Prerequisite: Senior standing.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME
460 Undergraduate Seminar (1) (unit
change effective Fall 2001)
Preparation, oral presentation
and discussion by students of technical papers on recent engineering
developments. 2 seminar-discussions. Prerequisite: Senior standing.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME Courses][MFE
Courses]
IME
461, 462 (Individual) 471, 472 (Team) Senior Project (2) (3)
(unit change effective Fall 2001)
Selection and completion of
a project under faculty supervision. Projects typical of problems
which graduates must solve in their fields of employment. Project
results are presented in a formal report. Minimum 120 hours total
time. Prerequisite: IME 460.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
IME 499/499A/499L
Special Topics for Upper Division Students (1-4)
Group study of a selected topic,
the title to be specified in advance. Total credit limited to
8 units, with a maximum of 4 units per quarter. Prerequisite:
Permission of instructor. Instruction is by lecture, laboratory,
or a combination of both.
[Top][MFE Curriculum][IE
Curriculum][IME Homepage][IE
Courses][IME Courses][MFE Courses]
MFE 126/126L
Engineering Graphics I/Laboratory (2/1)
Engineering graphics for product design, manufacturing
and construction. Emphasis on graphic communication used for
processing parts and layouts. Orthographic projection, pictorial
views, section and auxiliary views, dimensioning for production
processing, and the four fundamental views of descriptive geometry.
Use of instruments and CAD for engineering drawings. 2 lecture-problems,
1 three-hour laboratory.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 201/201L
Manufacturing Systems Processes/Laboratory (3/1)
Study of basic manufacturing processes with emphasis
on terminology, technology, process principles and capabilities,
material selection and comparative advantages and disadvantages.
Processes discussed include material removal, joining, assembly,
and casting. Other topics include NC, measurement and gaging
and statistical methods. 3 lecture-problems, 1 three-hour laboratory.
[Top][MFE Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 217/217L Manufacturing
Processes - Materials, Metrology and Treatments/Laboratory (2/1)
First in a three-course sequence. Provides basic knowledge
of engineering materials and the enhancement of their mechanical
properties, measurement methods and process controls. Statistical
process contro; heat treatment of materials; electronic manufacturing
and surface tehnology. 2 lecture/problem solving and 1 three-hour
laboratory.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 221/221L
Manufacturing Processes I-Metal Removal (2/1)
An introduction to science of metal removal and the
physics of metal cutting as related to cutting tool geometry,
material being cut and machine tool being used. Consideration
of machine speeds, feeds, tolerances and surface finish determinants
as related to both manually and numerically controlled machines,
dynamics of metal cutting, tool life analysis, economics of machining,
the concept of group technology in cellular and flexible modes.
2 lecture-problems, 1 three-hour laboratory. Prerequisite: MFE 217/217L
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 226/226L
Engineering Graphics II/Laboratory (2/1)
Engineering graphics for manufacturing. Emphasis on
preparation and use of detail drawings and assembly drawings
and application of geometric and positional tolerancing (ANSI
Y14.5). Interpretation of engineering drawings, representation
of threads and fasteners, and assembly drawings using CAD. 2
lecture-problems, 1 three-hour laboratory. Prerequisite: MFE 126/126L or equivalent.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 230/230L
Manufacturing Processes II-Forming, Casting and Joining (2/1)
Theory and practice related to processes dealing with
the deformation, consolidation and casting of engineering materials.
Modern manufacturing methods are explored with emphasis placed
on the application of engineering principles to the production
of marketable products. Topics include: molding, casting, powder
metallurgy, hot and cold working, welding and heat treating manufacturing
processes and introductory exposure to manufacturing systems.
2 lecture/problems, 1 three-hour laboratory. Prerequisite: MFE 217/217L.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 310/310L Advanced Computer-Aided
Drafting/Laboratory (2/1)
Advanced commands and the development of skills in
3-D visualization, integration of word processing and spreadsheets
in drawing preparation; programming language for artificial intelligence;
wireframe and solid modeling. 2 lecture-problems, 1 three-hour
laboratory. Prerequisite: MFE 121, MFE
126/126L or equivalent.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 320/320L
Measurement and Methods/Laboratory (3/1)
Commonly used units of measurement, measurement devices
and measurement techniques found in industrial and environmental
systems including dimensional measurement, force, electricity,
time and work, noise, light, temperature, humidity, atmospheric
constituents and radiation. Emphasis on metrology, work measurement
and methods improvement. Introduction to process capability,
measurement assurance and the continuous improvement process.
3 lecture/problems, 1 three-hour laboratory. Prerequisite: Consent
of the instructor.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 323/323L Geometric Dimensioning
and Tolerancing (2/1)
Basics of dimensioning and tolerancing, tolerances
of form and position. Government and industry requirements. 2
lecture-problems, 1 three-hour laboratory. Prerequisite: MFE
121L or MFE 126/126L or equivalent.
[Top][MFE Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 326/326L
Production Engineering/Laboratory (3/1)
The utilization of engineering concepts in the planning
and design of processes and products. Selection of appropriate
manufacturing processes and systems; sequences of operations,
equipment and facilities; methods and tooling to assure optimum
producibility. 3 lecture/problems, 1 three-hour laboratory. Prerequisites:
MFE 221/221L and MFE
230/230L.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 350/350L
Principles of Numerical Control (2/1) See
photo of CNC Lab
Principles and applications of numerical control in
manufacturing, manual and computer-assisted programming, CNC
systems including microprocessor applications to production processes,
advanced NC systems for full contouring, macro-and variable programming,
programmable controllers for CNC and DNC applications in industry.
2 lecture-problems, 1 three-hour laboratory. Prerequisite: MFE 221/221L or equivalent.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 373/373L Tool and Die Engineering
I (2/1)
Introduction to tool and die fundamentals. Function,
components and appropriate manufacturing techniques are stressed.
Die life, maintenance, storage and safety are included. 2 lecture-problems,
1 three-hour laboratory. Prerequisites: MFE
221/221L, MFE 230/230L.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 375/375L
Computer-Aided Design/Computer-Aided Manufacturing/Laboratory
(3/1)
Integration of computer-aided design principles, part
design specifications and producibility concepts in computer-aided
manufacturing applications. Emphasis on machine tools for flexible
automation, CNC machining data generation, CAD/CAM interface
and communication of automated systems. 3 lecture/problems. 1
three-hour laboratory. Prerequisite: MFE 350/350L
and MFE 126/126L or equivalent.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 380/380L Manufacturing Metrology
(1/1)
The science of engineering measurement as used in
inspection and quality control. Emphasis is placed on the general
use of scientific measuring devices and how these devices can
be used to secure optimal conditions of manufacture. 1 lecture-problem,
1 three-hour laboratory.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 406 Safety Engineering (3)
Principles of safety engineering applied to manufacturing
systems. Control of noise, heat, electrical hazards, vibration,
radiation, lighting and air contaminants in the workplace. Accident
prevention. Material handling safety, machine guards and personal
protection equipment. 3 lecture-problems.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 410/410L Computer-Aided Design
(1)
Introduction to interactive computer graphics systems
with emphasis on its application in engineering design. Course
taught in an industrial environment. 1 lecture-problem, 1 three-hour
laboratory. Prerequisites: A course in computer programming,
MFE 126/126L or equivalent.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 411/411L Manufacturing Processes-Finishing
(1/1)
A comprehensive overview of the possibilities and
limitations of finishing processes for both metallic and non-metallic
materials. Consideration of cleaning methods, surface conditioning
and coating processes as related to obtaining high-quality products
at reduced manufacturing costs. 1 lecture-problem, 1 three-hour
laboratory. Prerequisites: MFE 201/201L
or equivalent.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 421 Manufacturing Operations Analysis
(3)
Analysis of manufacturing operations with emphasis
on system optimization, problem solving, feasible systems alternatives
and cost considerations. 3 lecture-problems. Prerequisites: IME 312.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 438/438L
Plastics Engineering I/Laboratory (2/1)
An investigation of non-metallic plastic materials,
their sources and polymer combination. Overview of organic chemistry
as it relates to plastics polymer chemistry. Plastics formulas,
mixing characteristics, flow characteristics, stability and additives.
Basic plastic polymers (both thermosetting and thermoplastic
resins). 2 lecture-problems, 1 three-hour laboratory.
[Top][MFE Curriculum][IE Curriculum][IME Homepage][IE Courses][IME Courses][MFE Courses]
MFE 439/439L Plastics Engineering
II/Laboratory (2/1)
A study of non-metallic plastic processing techniques.
Coatings, lamination, machining, compression, transfer, injection,
extrusion, vacuum, blow molding and casting processes. An analysis
of the major production techniques for thermoset and thermoplastic
resins. 2 lecture-problems, 1 three-hour laboratory. Prerequisite:
MFE 438/438L.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 450/450L
Introduction to Computer Integrated Manufacturing/Laboratory
(3/1)
Principles of high volume manufacturing systems, automated
material handling and storage devices, control systems in manufacturing,
data communication, part recognition. 3 lecture/problems, 1 three-hour
laboratory. Prerequisite: ECE 333 or ETE 210 or equivalent.
[Top][MFE Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 465 Metal
Working Theory and Applications (3)
Three-dimensional stress and strain analysis, yield
criteria for ductile metals. Stress-strain relations. Phenomenological
nature of engineering metals. Plane strain plastic deformation.
Plastic strain with axial symmetry and pseudo plane stress. Extremum
principles for plastic material. 3 lecture-problems. Prerequisites:
MFE 221/221L, MFE 230/230L,
ME 218.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 476/476L
Advanced Computer-Aided Manufacturing/Laboratory (3/1)
Principles of group technology, cellular manufacturing,
computer aided process planning, flexible manufacturing systems
and computer networks in manufacturing. Applications of artificial
intelligence and expert systems in manufacturing. 3 lecture/problems,
1 three-hour laboratory. Prerequisite: MFE
450/450L.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 484 Producibility Engineering
(3)
Engineering methodologies and design practices which
have proven in industry to improve product producibility, reliability,
and quality are presented. Concepts include concurrent engineering,
just-in-time manufacturing and cellular arrangements for flexible
manufacturing.
[Top][MFE Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses]
MFE 499/499A/499L Special Topics for
Upper Division Students (1-4)
Group study of a selected topic, the title to be specified
in advance. Total credit limited to 8 units, with a maximum of
4 units per quarter. Prerequisite: Permission of instructor.
Instruction is by lecture, laboratory or a combination of both.
[Top][MFE
Curriculum][IE Curriculum][IME
Homepage][IE Courses][IME
Courses][MFE Courses] |
